Ingcaphephe Yenkqubo Yokucoca
Iminyaka eyi-11 yamava okuVelisa
- export02@vithyfilter.com
- +86 15821373166
VITHY®I-Titanium Powder Sintered Cartridgeyenziwe nge-titanium powder ngokusebenzisa ubushushu obuphezulu be-sintering. Ayinayo nayiphi na i-media yokuchitha kwaye ayifaki naluphi na ungcoliseko lwekhemikhali. Inokumelana nokuphindaphindwa kobushushu obuphezulu okanye ukusetyenziswa ngokuqhubekayo kobushushu obuphezulu. Ikhatriji yokucoca intonga ye-titanium inokumelana nobushushu obuphezulu obungama-280°C (kwimeko emanzi) kwaye inokumelana nokutshintsha koxinzelelo okanye iimpembelelo. Inamandla aphezulu okudinwa, ukuhambelana kweekhemikhali okugqwesileyo, ukuxhathisa ukubola, kwaye ilungele ukuhluza iiasidi, iialkali, kunye nezinyibilikisi eziphilayo. Izinto ze-titanium zinokumelana ne-acids ezinamandla kwaye zinokucocwa kwaye zisetyenziswe kwakhona. Ngokusebenza okugqwesileyo, ingasetyenziselwa ukuhluzwa kokufunxa kunye noxinzelelo loxinzelelo.
I-cartridge ifumaneka ngee-end caps ezifana ne-M20, i-M30, i-222 (uhlobo lokufaka), i-226 (uhlobo lwe-clamp), i-flat, i-DN15, kunye ne-DN20 (umsonto), ngelixa ii-caps ezikhethekileyo zokuphela zingenziwa ngokwezifiso.
| Ugcino | 0.22, 0.45, 1, 3, 5, 10, 15, 20, 30, 50, 80, 100μm |
| End Cap (Material TA1 Titanium) | M20, M30, 222 (uhlobo lokufaka), 226 (uhlobo lokubamba), flat, DN15, kunye DN20 (umsonto), enye customizable |
| Diameter | Φ14, 20, 30, 35, 40, 50, 60, 70, 75, 80 mm |
| LInge | 10 - 1000 mm |
| Maximum Ubushushu Resistance | 280 °C (kwimo emanzi) |
| Φ30 Uthotho | Φ40 Uthotho | Φ50 Uthotho | Φ60 Uthotho |
| Φ30 × 30 | Φ40 × 50 | Φ50 × 100 | Φ60 × 125 |
| Φ30 × 50 | Φ40 × 100 | Φ50 × 200 | Φ60 × 254 |
| Φ30 × 100 | Φ40 × 200 | Φ50 × 250 | Φ60 × 300 |
| Φ30 × 150 | Φ40 × 300 | Φ50 × 300 | Φ60 × 500 |
| Φ30 × 200 | Φ40 × 400 | Φ50 × 500 | Φ60 × 750 |
| Φ30 × 300 | Φ40 × 500 | Φ50 × 700 | Φ60 × 1000 |
Ikhatriji inokwenziwa kuzo zombini isihluzo esizenzekelayo kunye nesihluzo semanuwali.
1. Isihluzi esizenzekelayo:
2. Isihluzo sesandla:
Indlu yokucoca yenziwe ngentsimbi ekumgangatho ophezulu engama-304 okanye i-316L, kunye nemigangatho yomibini yangaphakathi nangaphandle egudisiweyo. Ixhotyiswe ngekhatriji yentonga ye-titanium enye okanye ezininzi, enika iimpawu zokumelana nobushushu obuphezulu, ukumelana nokugqwala, ukuchaneka okuphezulu kokucoca (ukuya kuthi ga kwi-0.22 um), i-non-toxicity, akukho kuchithwa kwamasuntswana, ukufunxwa kwamacandelo amayeza, akukho kungcoliseka kwesisombululo sokuqala, kunye nobomi benkonzo ende (ngokuqhelekileyo i-5-10 yeemfuno zokutya kunye ne-pharmacy yeminyaka yonke) GMP.
Ngaphaya koko, ineenzuzo zobukhulu obuncinci, ubunzima obulula, ukusetyenziswa ngokulula, indawo enkulu yokuhluza, isantya esisezantsi sokuvaleka, isantya sokuhluza ngokukhawuleza, akukho ngcoliseko, uzinzo oluhle lwe-thermal, kunye nokuzinza okuhle kakhulu kweekhemikhali. Izihluzi zeMicrofiltration ziyakwazi ukususa uninzi lwamasuntswana, ziwenze asetyenziswe ngokubanzi ukucocwa nokuvala inzala.
| THeoretical Flow Rate | Ci-artridge | Inlet & Umbhobho wokuPhuma | Cunxulumano | Isalathiso esiDimensional seMilinganiselo yangaphandle | ||||||
| m3/h | Qty | LInge | OI-uter diameter (mm) | Mindlela | Sukucaciswa | A | B | C | D | E |
| 0.3-0.5 | 1 | 10'' | 25 | Ufakelo olukhawulezayo | Φ50.5 | 600 | 400 | 80 | 100 | 220 |
| 0.5-1 | 20'' | 25 | 800 | 650 | ||||||
| 1-1.5 | 30'' | 25 | 1050 | 900 | ||||||
| 1-1.5 | 3 | 10'' | 32 | Ufakelo olukhawulezayo | Φ50.5 | 650 | 450 | 120 | 200 | 320 |
| 1.5-3 | 20'' | 32 | 900 | 700 | ||||||
| 2.5-4.5 | 30'' | 34 | 1150 | 950 | ||||||
| 1.5-2.5 | 5 | 10'' | 32 | Ufakelo olukhawulezayo | Φ50.5 | 650 | 450 | 120 | 220 | 350 |
| 3-5 | 20'' | 32 | 900 | 700 | ||||||
| 4.5-7.5 | 30'' | 38 | 1150 | 950 | ||||||
| 5-7 | 7 | 10'' | 38 | Ufakelo olukhawulezayo lweflange enemisonto | Φ50.5 G1'' DN40 | 950 | 700 | 150 | 250 | 400 |
| 6-10 | 20'' | 48 | 1200 | 950 | ||||||
| 8-14 | 30'' | 48 | 1450 | 1200 | ||||||
| 6-8 | 9 | 20'' | 48 | Ufakelo olukhawulezayo lweflange enemisonto | Φ64 G1.5'' DN50 | 1000 | 700 | 150 | 300 | 450 |
| 8-12 | 30'' | 48 | 1250 | 950 | ||||||
| 12-15 | 40'' | 48 | 1500 | 1200 | ||||||
| 6-12 | 12 | 20'' | 48 | Ufakelo olukhawulezayo lweflange enemisonto | Φ64 G1.5'' DN50 | 1100 | 800 | 200 | 350 | 500 |
| 12-18 | 30'' | 57 | 1350 | 1050 | ||||||
| 16-24 | 40'' | 57 | 1600 | 1300 | ||||||
| 8-15 | 15 | 20'' | 76 | I-flange enemisonto | G2.5'' DN65 | 1100 | 800 | 200 | 400 | 550 |
| 18-25 | 30'' | 76 | 1350 | 1050 | ||||||
| 20-30 | 40'' | 76 | 1300 | 1300 | ||||||
| 12-21 | 21 | 20'' | 89 | I-flange enemisonto | G3'' DN80 | 1150 | 800 | 200 | 450 | 600 |
| 21-31 | 30'' | 89 | 1400 | 1100 | ||||||
| 27-42 | 40'' | 89 | 1650 | 1300 | ||||||
Isetyenziswa kakhulu kwi-asidi, i-alkali, kunye ne-organic solvent filtration, njl. kumashishini afana namayeza, ukutya, iikhemikhali, i-biotechnology, kunye ne-petrochemicals.
1. Ukunyangwa kokuMhlwa
Intsimbi ye-Titanium yintsimbi engasebenziyo enokumelana nokugqwesa okugqwesileyo. Ikhatriji yentonga ye-titanium eyenziwe ngesinyithi ye-titanium ingasetyenziselwa ukuhluza kwi-alkali eyomeleleyo kunye nemathiriyeli eyomeleleyo yeasidi. Isetyenziswa ngokubanzi kwishishini lemichiza kunye nenkqubo yokucoca ukuveliswa kwe-enzyme ye-solvent kwishishini lamayeza. I-cartridge ye-Titanium iluncedo kakhulu kwiimeko apho i-solvents ye-organic efana ne-acetone, i-ethanol, i-butanone, njl. Kwiimeko ezinjalo, iikhatriji zokucoca i-polymer ezifana neekhatriji ze-PE kunye ne-PP zidla ngokunyibilika ngezi zinyibilikisi ziphilayo. Kwelinye icala, iirodi ze-titanium zizinzile kwizinyibilikisi zendalo kwaye ke zifumana ukusetyenziswa kakhulu.
Umgangatho wokumelana nokubola kwesihluzo se-titanium singahlelwa ngolu hlobo lulandelayo:
Iklasi A: I-corrosion-resistant ngokupheleleyo kunye nesantya sokutya ngaphantsi kwe-0.127mm / ngonyaka. Inokusetyenziswa.
Udidi B: Ukumelana ne-corrosion kunye nesantya sokutya phakathi kwe-0.127-1.27mm / ngonyaka. Inokusetyenziswa.
Udidi C: Alukwazi ukumelana ne-corrosion kunye nezinga lokutya elidlula i-1.27mm / ngonyaka. Ayinakusetyenziswa.
| Udidi | Mi-aterial Igama | MUgxininiso lwendawo (%) | Tubushushu (℃) | Umyinge wokuRhakala (mm/ngonyaka) | IBanga lokuchasa iCorrosion |
| Iiasidi ezingaphiliyo | Hydrochloric acid | 5 | Ubushushu begumbi / ukubilisa | 0.000/6.530 | A/C |
| 10 | Ubushushu begumbi / ukubilisa | 0.175/40.870 | B/C | ||
| Iasidi yesulfuric | 5 | Ubushushu begumbi / ukubilisa | 0.000/13.01 | A/C | |
| 60 | Ubushushu begumbi | 0.277 | B | ||
| I-asidi ye-nitric | 37 | Ubushushu begumbi / ukubilisa | 0.000/<0.127 | A/A | |
| 90 (imhlophe kwaye inomsindo) | Ubushushu begumbi | 0.0025 | A | ||
| Phosphoric acid | 10 | Ubushushu begumbi / ukubilisa | 0.000/6.400 | A/C | |
| 50 | Ubushushu begumbi | 0.097 | A | ||
| Iasidi edibeneyo | HCL 27.8% HNO317% | 30 | / | A | |
| HCL 27.8% HNO317% | 70 | / | B | ||
| HNO3: H2SO4=7:3 | Ubushushu begumbi | <0.127 | A | ||
| HNO3: H2SO4=4:6 | Ubushushu begumbi | <0.127 | A |
| Udidi | Mi-aterial Igama | MUgxininiso lwendawo (%) | Tubushushu (℃) | Umyinge wokuRhakala (mm/ngonyaka) | IBanga lokuchasa iCorrosion |
| Isisombululo saline | I-Chloride ye-Ferric | 40 | Ubushushu begumbi/95 | 0.000/0.002 | A/A |
| I-sodium chloride | Isisombululo esigcweleyo kwi-20 °C | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A | |
| I-ammonium chloride | 10 | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A | |
| I-Magnesium chloride | 10 | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A | |
| I-sulfate yobhedu | 20 | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A | |
| I-Barium chloride | 20 | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A | |
| I-sulfate yobhedu | CuSO4wahlutha, H2SO42% | 30 | <0.127 | A/A | |
| I-sodium sulfate | 20 | Ukubilisa | <0.127 | A | |
| I-sodium sulfate | Na2SO421.5% H2SO410.1% ZnSO40.80% | Ukubilisa | / | C | |
| Ammonium sulfate | Ifakwe kwi-20 °C | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A |
| Udidi | Mi-aterial Igama | MUgxininiso lwendawo (%) | Tubushushu (℃) | Umyinge wokuRhakala (mm/ngonyaka) | IBanga lokuchasa iCorrosion |
| Isisombululo sealkaline | I-sodium hydroxide | 20 | Ubushushu begumbi/ ukubilisa | <0.127/<0.127 | A/A |
| 50 | 120 | <0.127/<0.127 | A | ||
| 77 | 170 | >1.27 | C | ||
| Potassium hydroxide | 10 | Ukubilisa | <0.0127 | A | |
| 25 | Ukubilisa | 0.305 | B | ||
| 50 | 30/Ukubilisa | 0.000/2.743 | A/C | ||
| I-ammonium hydroxide | 28 | Ubushushu begumbi | 0.0025 | A | |
| I-sodium carbonate | 20 | Ubushushu begumbi/ ukubilisa | <0.127/<0.127 | A/A |
| Udidi | Mi-aterial Igama | MUgxininiso lwendawo (%) | Tubushushu (℃) | Umyinge wokuRhakala (mm/ngonyaka) | IBanga lokuchasa iCorrosion |
| Iiasidi ze-Organic | Acetic acid | 35-100 | Ubushushu begumbi/ ukubilisa | 0.000/0.000 | A/A |
| Formic acid | 50 | Ubushushu begumbi / ukubilisa | 0.000 | A/C | |
| Oxalic acid | 5 | Ubushushu begumbi / ukubilisa | <0.127/29.390 | A/C | |
| I-lactic acid | 10 | Ubushushu begumbi / ukubilisa | 0.000/0.033 | A/A | |
| Formic acid | 10 | Ubushushu begumbi / ukubilisa | 1.27 | A/B | |
| 25 | 100 | 2.44 | C | ||
| Stearic acid | 100 | Ubushushu begumbi / ukubilisa | <0.127/<0.127 | A/A |
2. High Ukumelana nobushushu
Isihluzo se-Titanium sinokumelana namaqondo aphezulu ukuya kwi-300 ° C, engenakulinganiswa nezinye iikhatriji zokucoca. Olu phawu lusetyenziswa kakhulu kwiindawo zokusebenza ezinobushushu obuphezulu. Nangona kunjalo, iikhatriji zokucoca ezenziwe ngemathiriyeli yepolymer ephezulu zinokumelana neqondo lobushushu elibi, elingekho ngaphezulu kwe-50 ° C. Xa iqondo lokushisa lidlula i-50 ° C, inkxaso yabo kunye ne-membrane yokucoca iya kutshintsha, okubangela ukuphambuka okubalulekileyo ekuchanekeni kokucoca. Nditsho neekhatriji ze-PTFE zokucoca, xa zisetyenziswa kwiindawo zokusebenza ezinoxinzelelo lwangaphandle lwe-0.2 MPa kunye namaqondo obushushu angaphezu kwe-120 ° C, ziya kukhubaza kwaye ziguge ngokuhamba kwexesha. Ngakolunye uhlangothi, i-titanium rod filter cartridges ingasetyenziselwa ixesha elide kwiindawo ezinjalo, ngaphandle kotshintsho kwi-micro-pores okanye ukubonakala kwayo.
Isetyenziselwa ngokubanzi ukuhluzwa kolwelo oluphezulu lobushushu kunye nokuhluzwa komphunga (njengokuhluzwa komphunga ngexesha leenkqubo zokubilisa).
3. Ukusebenza kakuhle koomatshini (amandla aphezulu)
Iikhatriji zokucoca intonga ye-Titanium zinomsebenzi oncomekayo ngoomatshini, zimelana noxinzelelo lwangaphandle lwe-10 kg kunye noxinzelelo lwangaphakathi lokutshabalalisa amandla angama-6 kg (avavanywe ngaphandle kwamalungu). Ke ngoko, izihluzi zentonga ye-titanium zingasetyenziswa kwiinkqubo ezibandakanya uxinzelelo oluphezulu kunye nokucoca ngokukhawuleza. Ezinye iikhatriji zokucoca iipolymer eziphezulu zifumana utshintsho kwi-microporous aperture okanye ukuphuka xa ziphantsi koxinzelelo lwangaphandle oludlula i-0.5 MPa.
Usetyenziso: Ishishini lokuvelisa i-Chemical fiber, ishishini lamachiza, ukuhluzwa komoya ocinezelweyo, i-aeration enzulu ephantsi kwamanzi, i-aeration kunye nokukhupha amagwebu e-coagulants, njl.
Ukusebenza kakuhle komatshini (njengoko kubonisiwe kumfanekiso), omelele kwaye ukhaphukhaphu (ubunzima obuthile be-4.51 g/cm3).
| Model | UkuSebenza koomatshini kuBubushushu beGumbi | |
| σb (kg/mm2) | δ10 (%) | |
| T1 | 30-50 | 23 |
| T2 | 45-60 | 20 |
4. Ekscellent Regeneration Effect
Ikhatriji yokucoca intonga ye-titanium ineziphumo ezilungileyo zokuhlaziya. Ngenxa yokunganyangeki kwayo kakuhle kwi-corrosion, ukumelana nobushushu obuphezulu, kunye nokusebenza kwamandla aphezulu, kukho iindlela ezimbini zokuhlaziya: ukuvuselelwa komzimba kunye nokuvuselelwa kweekhemikhali.
Iindlela zokuvuselela umzimba:
(1) Ukubuyisela umva wamanzi acocekileyo (2) Ukuvuthela ngomphunga (3) Ukucoca nge-ultrasonic
Iindlela zokuvuselela iikhemikhali:
(1) Ukuhlamba ngealkaline (2) Ukuhlamba ngeasidi
Phakathi kwezi ndlela, ukuvuselelwa kweekhemikhali kunye neendlela zokucoca i-ultrasonic zizona zilungileyo, kunye nokunciphisa okuphantsi kokusebenza kakuhle kokucoca. Ukuba isetyenziswe okanye ihlanjululwe ngokusebenza okuqhelekileyo, ubomi benkonzo bunokwandiswa kakhulu. Ngenxa yesiphumo esihle sonyango lokuvuselelwa kweentonga ze-titanium, ziye zasetyenziswa ngokubanzi ekuhluzeni i-viscous liquids.
| ModelIndex | T1 | T2 | T3 | T4 | T5 | T6 | T7 | T8 | T9 |
| FUkuthelekelela ukulinganisa (μm) | 50 | 30 | 20 | 10 | 5 | 3 | 2 | 1 | 0.45 |
| I-Relative Permeability Coefficient (L/cm2.min.Pa) | 1 × 10-3 | 5 × 10-4 | 1 × 10-4 | 5 × 10-5 | 1 × 10-5 | 5 × 10-6 | 1 × 10-6 | 5 × 10-7 | 1 × 10-7 |
| I-Porosity (%) | 35-45 | 35-45 | 30-45 | 35-45 | 35-45 | 35-45 | 35-45 | 35-45 | 35-45 |
| Uxinzelelo loNgqondo lwaNgaphakathi (MPa) | ≥0.6 | ≥0.6 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 |
| Uxinzelelo loLwahlulo lwaNgaphandle (MPa) | ≥3.5 | ||||||||
| Uxinzelelo lokuSebenza olulinganisiweyo (MPa) | 0.2 | ||||||||
| FIxabiso eliphantsi (m3/h, 0.2MPa amanzi acocekileyo) | 1.5 | 1.0 | 0.8 | 0.5 | 0.35 | 0.3 | 0.28 | 0.25 | 0.2 |
| FIxabiso eliphantsi (m3/ min, 0.2MPa umoya) | 6 | 6 | 5 | 4 | 3.5 | 3 | 2.5 | 2 | 1.8 |
| Application Imizekelo | Ukuhluzwa kwamasuntswana arhabaxa | Ukuhluzwa kwentlenga erhabaxa | Ukuhluzwa kakuhle kwentlenga | Ukucoca inzala | |||||
